Special

A Complete Guide to Rack Mounted Servers – Its Basics, Features and Much More!

A rack server, as it name suggests is basically a computer that is designed to be installed in a special framework called rack. It is often called rack mounted server and is a computer that is dedicated to be used as a server.

Few basic things you should know about Rack server

A rack server has multiple mounting slots that are termed as bays. Each of them is designed to carry a hardware unit that is secured in their place with the screws.

A single rack may contain multiple servers that are stacked over one another, minimizing the needed floor space and even consolidating the network resources. The rack server even simplifies the cabling among the network components.

The Dell Poweredge rack server also contains a unique cooling system that is sometimes essential to prevent the excessive heat buildup. This situation may occur if many power dissipating components are cramped in small space.

Some Awesome features of Rack Mount Servers

The height of single rack is fixed to 44.5 mm or 1.75 inches. This rack is typically called as one rack unit and sometimes even abbreviated by letter ‘U’. The industrial rack servers are normally standardized with the rack cabinet of 42U. The rack mount servers are specially designed to fit into these standard rack cabinets.

Generally, all the Dell servers can be easily accessed with some of the most common devices including keypad, monitor, and mouse. This can be easily done by making the use of hardware or software like switch. Most of the rack mount servers can also be mounted even upside down.

Rackmount servers are typically manufactured for use by the military and other industries and come with powerful processors like Intel Xeon Processors. Some of the most wonderful design features of the rack servers are as follows.

  • Installation of the rack servers is very easy due to the locking pins on side of the server that can fit into slots on the moveable rails.
  • The rack mount servers have LED identifiers on the front as well as back to show which serves to be faulty. This can be very helpful in case you have many servers on rack.
  • Rack mount servers usually slide on the rails to fit in their place. They can even be locked at the different places on the rails. So, when they need to slide out for the maintenance purpose, the hardware doesn’t have to be moved at all.
  • There exists folding cable tray at rear end of server to hold folded cables. This can be very beneficial since it allows the server to remain plugged in when it is extended out of rack while maintenance. This greatly simplifies the entire maintenance process.
  • The rails on which the rack server is mounted may also have a handle to let the server move on rails.

If you want the best business server solutions, then Aventis Systems is the right place for you. You can visit their website to get solutions to power any size of the workload.